TC1000 PNEUMATIC CONVEYOR
PNEUMATIC CONVEYOR SYSTEM
TeknoConvey pnemautic conveyor vessel use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot. Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.
Avarage Spesifications pneumatic conveyor;
About TC1000 Pneumatic Conveyor
Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio (135-140).
For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.
TeknoConvey can produce specify carbon, stainless steel or epoxy coated.
TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank.
0 yorum:
Yorum Gönder