 |
| Dense Phase Conveying |
VİSİT COMPANY TEKNOCONVEY
DENSE PHASE CONVEYING UNIT
TeknoConvey pnemautic dense phase conveying unit pressure vessel use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot. Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the dense phase convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.
Avarage Spesifications Dense Phase Conveying
About TC500 Pneumatic Dense Phase Conveying
Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio (135-140).
For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.
TeknoConvey can produce specify carbon, stainless steel or epoxy coated.
TeknoConvey all dense phase conveying vessels suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank.
0 yorum:
Yorum Gönder