TC4000 DENSE PHASE CONVEYING

VİSİT COMPANY TEKNOCONVEY

TC4000 DENSE PHASE CONVEYING

DENSE PHASE CONVEYING

TeknoConvey pnemautic dense phase pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

 

Avarage Spesifications :

 

 

About TC4000 dense phase conveying unit

 

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

 

TC3000 DENSE PHASE TRANSPORTER

VİSİT COMPANY TEKNOCONVEY

TC3000 DENSE PHASE TRANSPORTER

DENSE PHASE TRANSPORTER FOR POWDER AND GRANULES

TeknoConvey pnemautic dense phase pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

 

Avarage Spesifications of dense phase transporter

 

 

About TC3000 Dense phase tranporter

 

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

 

DENSE PHASE TRANSPORTER

VİSİT COMPANY TEKNOCONVEY

TC2000 DENSE PHASE TRANSPORTER

DENSE PHASE TRANSPORTER

 

TeknoConvey pnemautic dense phase transporter pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

 

Avarage Spesifications dense phase transporter

 

 

About TC2000 Dense Phase Transporter

 

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

Dense Phase Transport

VİSİT COMPANY TEKNOCONVEY

TC1500 DENSE PHASE CONVEYING

DENSE PHASE CONVEYING POT

 

TeknoConvey pnemautic dense phase pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

 

Avarage Spesifications dense phase conveying Vessel :

 

About TC1500 Dense Phase Conveying Vessel

 

Pneumatic dense phase conveing vessel uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

PNEUMATIC CONVEYOR SYSTEM

TC1000 PNEUMATIC CONVEYOR

PNEUMATIC CONVEYOR SYSTEM

 

TeknoConvey pnemautic conveyor vessel use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

 

Avarage Spesifications pneumatic conveyor;

 

About TC1000 Pneumatic Conveyor

 

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

 

Pneumatic Conveying Systems 750LT

VİSİT COMPANY TEKNOCONVEY

TC750 POWDER TRANSPORT SYSTEM

DENSE PHASE POWDER TRANSPORT SYSTEM

TeknoConvey pnemautic dense powder transport unit use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the powders  to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

Avarage Spesifications dense phase powder transport system

About TC750  Dense Phase Powder Transport Unit

Pneumatic dense phase powder transport conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

Pneumatic Conveying Systems 500LT

Dense Phase Conveying

VİSİT COMPANY TEKNOCONVEY

DENSE PHASE CONVEYING UNIT

TeknoConvey pnemautic dense phase conveying unit pressure vessel use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the dense phase convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

Avarage Spesifications Dense Phase Conveying

About TC500   Pneumatic Dense Phase Conveying

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase conveying vessels suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

Pneumatic Conveying Systems 250LT

VİSİT COMPANY TEKNOCONVEY

PNEUMATIC TRANSFER UNIT 

TeknoConvey pneumatic transfer dense phase pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, pneumatic transfering the material to enter the convey line pipes to feed feeding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

Avarage Spesifications Pneumatic Tranfering

About TC Pneumatic Transfer Unit 250  

Pneumatic transfer dense phase conveying uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

Pneumatic Conveying Systems 100LT

VİSİT COMPANY TEKNOCONVEY

DENSE PHASE PNEUMATIC TRANSPORT UNIT 100 lt

TeknoConvey pneumatic transport dense phase conveying pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transporting the material to enter the convey line pipes to feed feding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

Avarage Spesifications Pneumatic Transport Unit 

About TC100  Pneumatic Transport Unit

Pneumatic transporter dense phase uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase pneumatic transport tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank. 

Pneumatic Conveying Systems 50LT

VİSİT COMPANY TEKNOCONVEY

PNEUMATIC CONVEYING SYSTEM 50 LT

TeknoConvey pnemautic conveying dense phase pot use to load and high-pressure air to convey. During the loading cycle, feeding buterfly valves open to allow material to flow by gravity into the tank from one or more sources, such as hopper and storage silos. When the tank is full, the feding inlet butterfly valves switch off to stop the flow of material inside to pot.  Many point injection then pressurizes the tank to the discharge set point and the discharge valve opens, transfering the material to enter the convey line pipes to feed feding point. When the pot or tank is empty, the conveying air is shut off and the pressure which remaining in the tank clears the remaining slug of material from the convey pipes.

Avarage Spesifications "Pneumatic Conveying" System;

About TC50 Pneumatic Conveying Transporter;  

Pneumatic dense phase conveyor uses high pressure air to convey at extremely low line velocities (120 m/min) and the highest material to air ratio  (135-140).

For control TeknoConvey using programmable logic controls (PLC) allow the easy control and supervision of the operation.

TeknoConvey can produce specify carbon, stainless steel or epoxy coated.

TeknoConvey all dense phase tank suitable to mount has multiple inlets and load cells also customer can use as weighing hopper our pressure tank.